Two 450kW dual-core blowers in South East England
Advanced blower core is amazingly compact
Acoustic enclosure and integrated PLC
The impeller uses both axial and radial compression for greater efficiency
'Plug and play' design facilitates installation
Multiple units under outdoor canopy
Some 50% smaller footprint than tradition PD blowers
Solid forged impeller is suitable for high speed operation
Bump foil air bearing
Completely free-standing
Compact, modern design
The Turbo Blower is every aeration expert’s dream. With a footprint of some 50% of its rivals, this freestanding blower is up to 40% more efficient than traditional positive displacement blowers, and up to 10% more efficient than other
With such incredible
At the heart of the Turbo Blower is bump foil air bearing technology. Air bearings are oil-free, contactless and almost frictionless in operation, meaning less noise and vibration, indefinite bearing life, and no maintenance. They have been exhaustively tested through 25,000 start-stop cycles – the equivalent of more than 20 years’ operation.
The high-efficiency impeller was designed using software based on gas turbine engine technology in the aero industry. It uses both axial and radial
The Permanent Magnet Synchronous Motor (PMSM) gives precise control of motor speed and minimal efficiency loss throughout a wide turndown range. This gives the Turbo Blower significant efficiency gains compared to blowers with other motor types. With very low heat emissions, no additional cooling system is required.
Compared to most of its predecessors, the Turbo Blower is very self-contained, making it as close as you can get to ‘plug and play’. This significantly reduces installation time and simplifies control. A non-proprietary touch screen PLC, Variable Speed Drive and condition monitoring all come integrated as standard.
The Turbo Blower can be installed both indoors and outdoors under cover, with a proven track record at temperatures ranging from -30°C to +50°C. There are also dual and quad core options for larger aeration requirements, reducing the overall footprint even further and providing built-in redundancy. This can be useful for future growth schemes.
Most units have no maintenance requirements apart from routine filter changes. Filters are inexpensive and can be cleaned and re-used. Larger units may require routine coolant checks. Built-in condition monitoring gives early alerting of any maintenance requirements.
Features | Benefits |
---|---|
Forged high-speed turbo impeller designed in-house |
Most efficient impeller technology available |
Bump-foil air bearings |
Cool, lubrication-free, contactless and almost frictionless operation |
Permanent Magnet Synchronous Motor (PMSM) |
Most efficient motor type with minimal efficiency loss on turnodown |
High efficiency Variable Speed Drive optimised for PMSM motor control |
Eliminates power factor requirement, maximises motor life and optimises |
Built-in PLC |
Allows control based on airflow, pressure, DO and/or a real-time control system< |
Line input reactor to reduce voltage irregularities |
Reduces harmonics and nuisance tripping |
Sine wave filter |
Reduces motor temperature and protects 20 year design life |
Condition monitoring as standard, including vibration, bearing temperature, pressure and airflow |
Advises of maintenance requirements and maximises asset life |
Housed in sound-dampening enclosure |
Silent operation (<80 dBA) without need for additional acoustic enclosures required |
Compact, all-in-one design |
Free-standing, with very small footprint |
‘Plug-and-play’ design |
Minimises installation time on site |
Tested to ASME PTC 10 standards and certified to UL, CE and CSA requirements |
Ensures highest build quality and longest life for complete peace of mind |
Where are TurboBlowers used? |
Why are they selected? |
Wastewater aeration |
Exceptional energy efficiency |
Sludge aeration |
Lowest whole life cost (totex) |
Clean water aeration |
No wearing parts or lubrication |
Specialist industrial air requirements |
Ease of maintenance |
Very small footprint |
|
Huge turndown capability |
|
Superior build quality and asset life |
© Copyright Corgin Ltd
VAT Number: 756 1626 20
Company Number: 621 8442
Phone: +44 (0)1785 229300
Share This Page
LinkedIn Facebook Twitter Google Plus Email